Skip to product information
1 of 6

Track Chassis Mounted Splitter - MK6 Golf R (2010-2012) V3

Track Chassis Mounted Splitter - MK6 Golf R (2010-2012) V3


In stock

Regular price $1,950.00 USD
Regular price Sale price $1,950.00 USD
Sale Sold out
Shipping calculated at checkout.
Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
Powered by Shopify Planet

All sales are final, no returns or refunds. This item does not qualify for free shipping. 

This product is assembled to order and ships 5-10 business days after the order is placed.  Made in USA - 1 year warranty. 

We sell many of these components individually here:

Our track splitter has been developed over multiple months using CFD (computational fluid dynamics) testing to predict downforce, drag and stability. We consulted with YRC (Yeti Racecraft Inc.) to develop and refine the design; and performed all of the testing on a MK7 model to calculate the most accurate numbers we could.

Search around and you will find that most businesses provide data points from their airfoil or blade alone, because the part was designed to be universal. Our kit has been developed specifically for the MK7/7.5 platform. 

This kit has been designed so that each component can be replaced, including just half of the blade. Drive off track, bend an endplate or mangle a lower strake on one side? No problem, just swap on a replacement (available here).

To learn more about the CFD design and testing process, Yeti has a great article here.

To learn more about the work Brian and I did for the MK7, check out this video (coming soon).

Our results are shown in the table image. 100+ lbs of downforce @100mph, with exponentially more as speed increases. 

We utilize the same brackets for our V2, V3, V4 kits. So you can easily unbolt and swap on a different blade for street, or autocross use. 

Please note that fender vents are not included in this package. 

Please read these product details thoroughly for fitment and installation requirements. This can be installed in a driveway with basic tools. Please review the written  install sheet and tool list to understand what is involved in the process, or watch our install video. Professional install recommended if you are not comfortable removing the front crash bar. 

  • Brackets & rods come in raw aluminum unless powder coating option is selected. Expect some visible imperfections in the material from the cutting and bending process on raw aluminum parts.
  • This will not fit with any front mount/twin intercooler.
  • If you are on air ride, do not air-out onto these brackets, they are not designed to support the weight of an entire vehicle. 
  • Requires drilling two 11mm holes in the crash bar for install. 
  • Trimming the factory splash guard under the bumper is required (not the bumper).
  • Brackets are made of 5052 Aluminum, these mount to 6 points of the chassis/crash bar to hold a splitter blade of your choice. They are height adjustable in 12mm increments.


    Each Order includes:

    • Top driver & passenger side bracket
    • bottom brackets with pre-installed hex shank rivnuts for the lip/blade
    • Center support brace with pre-installed hex shank rivnuts for the lip/blade
    • Flange head bolts and nylock hardware for adjustable height settings
    • Flange head bolts and nylock hardware to mount to the Chassis. 
    • Countersunk hardware to attach a blade to brackets (3/8" or thinner blade)
    • 2 piece blade - 9mm thick -  black textured UV resistant plastic with a radiused edge and pre drilled countersunk holes and an air dam that contours to the lower edge of the bumper.
    • Side support rods - Aluminum rods, stainless hardware. \
    • Front cable supports, and mounting brackets
    • 4 piece endplate kit
    • Strakes for the bottom of the blade
    • Rear angle brace, for the rear edge of the blade (the most important edge of a splitter!)
    • Tire spat kit
    • Template to mount front cable supports
    • Printed Install Sheet with pictures 

    Add on options (not included):

    • Drill bit - 11mm step bit & 4mm pilot bit
    • Powder coating 

    Weights - 

    Full assembly - 39lbs

    Ships in a 24"x50"x6" box - 45lbs packed


    Whats the difference between versions?

    • V1 - Brackets - DIY kit

    • V2 - Blade with integrated air dam - Shaped for street or autocross use

    • V3 - CFD tested for optimum performance on a track car. Additions include:

    - Tire spats
    - Strakes
    - Additional bracing
    - Large endplates
    - Front cable supports
    - Modular design for easy part replacement
    • V4 - Street Blade without an air dam. More durable than any bumper mounted option on the market!

    Disclaimer - 

    Off road use only, not intended to be used on public roads. This product is not DOT approved. This product may alter the handling of the vehicle. The buyer is responsible for all modifications made to your car. CJM Industries llc assumes no responsibility or liability as a result from altering your car with our products. This product may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to conform to all applicable laws and regulations for road use, especially pertaining to safety. 

    Install Info

    Install sheets can be found on We are in the process of digitizing all sheets. If you can't find the copy you need, please email us!

    Shipping info:

    • Orders placed before 12pm EST typically ship the next business day if the product is in stock. Orders placed after 12pm EST will ship 48 hours later. 
    • Orders placed after 10am EST on Friday will ship on Monday. 
    • Tracking will be emailed as soon as we create the label. 
    • US shipping is free for orders over $75
    • Shipping to Canada is free on orders over $150. (Diffusers, skirts & splitters excluded) 
    • All international shipments are sent DDU and with signature required. You will be responsible for all duties and customs fees and arranging for delivery. 

    Shipping & FAQ

    • When will my order ship?
      • Orders placed before 12pm EST typically ship the next business day if the product is in stock. Orders placed after 12pm EST will ship 48 hours later. 
      • Orders placed after 10am EST on Friday will ship on Monday. 
      • DHL Orders placed after 10am EST on Friday will ship on Monday.
      • Tracking will be emailed as soon as we create the label. 
      • Do your products come with a warranty?
        • Yes! We offer a manufacturer warranty on all of our products, the time period ranges by product line, so feel free to contact us for replacement parts. Please be sure to include which pieces you need.
      • Do you ship international? What are the fees?
        • We do ship direct to some countries.
        • The customer is responsible for all import duties and customs fees. They are not built into the product cost. 
      • Is this 3D printed?
        • Yes, All of our pods are 3d printed to allow for continuous improvement. We don't make injection molds because they are far to expensive for the custom fit products we make.

        Still have a question that's not covered here?

        Contact Us

        View full details