Carbon brake cooling duct / deflector (full kit w/brackets) - (MK7 Golf all variants)
Carbon brake cooling duct / deflector (full kit w/brackets) - (MK7 Golf all variants)
Couldn't load pickup availability
This product has been in development for over a year, but we have been building brake ducting options for longer. We sent out numerous prototypes of this product to be tested on different platforms (Tested on Audi TTRS, Audi RS3, Mk7 Golf R, MK6 Golf R). The results from all 4 users were increased pad life (some doubled pad life!), longer sessions without cool down laps needed, and reduced lap times because the driver felt more confident in the pads staying within optimal operating temperature range for longer.
Performance:
We designed this solution to provide an easier install, and cheaper to service than brake ducting. Routing hoses on MQB cars is difficult because of space constraints, typically limiting you to 2-2.5" hose. @60mph vehicle speed 2.5" hose in a best case scenario will push ~180 CFM however with turns and wire flex hose, the efficiency is much less. Our deflectors can push conservatively over 200 CFM with less restriction. This is effectively an XL version of an OEM RS3 brake deflector. Our positioning is improved, and the aprons of the duct capture more air from a better pressure position under the car.
Construction:
- The duct is made of a carbon fiber with an S-glass blend with high temp epoxy resin. S glass is a more durable fiberglass mat, and gives the deflectors more durability than a pure carbon part.
- The mount is made of 5052 powder coated aluminum, the total assembly is under 4lbs.
-
This part is hand laid and vacuum cured at our Phoenixville PA shop to build a durable lightweight part. Due to the handmade nature of the process, there will be small surface imperfections. The back side of the part will have a raw peel ply appearance. Top coated with 2K matte clear. C- level finish.
Fitment:
Select the appropriate control arm to match your car. The deflector is the same for all options, but the mounting bracket is different for each control arm. We have confirmed fitment with OEM calipers and 529 Innovations Wilwood calipers. Other options may need minor trimming of the deflector at full lock.
- If you are using LCA's with Superpro inserts or JXB inserts - select OEM steel. These options occasionally use Audi steel LCA's, but we include spacers to fit VW or Audi stampings.
Other Considerations:
- CFD simulation estimates that these add 7lbs of drag, and 10lbs of downforce. Based on previous testing we have found anything under 30lbs of downforce @ 100mph is unlikely to be notable as a driver on a production car.
- We recommend only using these while on track. They are low to the ground, and have a high likelihood of damage from road debris during street driving.
- Adding fender vents will also increase the effectiveness of these deflectors.
Disclaimers:
Your results will vary depending on your setup and driving style. We cannot and do not make guarantees because there are too many variables involved. This is not a 'quick fix' for using street pads and DOT fluid on track. These should be used in conjunction with track specific pads, rotors and fluid to gain optimal performance.
Fast Shipping & FAQ
Fast Shipping & FAQ
- When will my order ship?
- Orders placed before 12pm EST typically ship the next business day if the product is in stock. Orders placed after 12pm EST will ship 48 hours later.
- Orders placed after 10am EST on Friday will ship on Monday.
- DHL Orders placed after 10am EST on Friday will ship on Monday.
- Tracking will be emailed as soon as we create the label.
- Do your products come with a warranty?
- Yes! We offer a manufacturer warranty on all of our products, the time period ranges by product line, so feel free to contact us for replacement parts. Please be sure to include which pieces you need.
- Do you ship international? What are the fees?
- We do ship direct to some countries outside the US.
- All international shipments are sent DDU and with signature required. You will be responsible for all duties and customs fees and arranging for delivery.
- The customer is responsible for all import duties and customs fees. They are not built into the product cost.
- What is your return & order cancellation policy?
- Please check it out here: Returns & cancelled orders
Still have a question that's not covered here?
Easy Returns
Easy Returns
Warranty:
For part replacements or destroyed products please contact us with the pieces you need! The warranty covers manufacturer defects and failed components for 1 year.
Cancelled Orders:
Once the order is placed, any cancelled orders will be charged a 3.5% credit card/Paypal fee that is deducted from the refund.
If tracking has already been created, cancelled orders will be charged a 10% restocking fee, based on the order total. The customer is responsible for shipping fees incurred and return shipping fees to send the product back for a refund.
We do not provide return labels for orders that ship out of the continental United States. You will have to create your own label to return the product.
Returns:
Our policy lasts 30 days. If 30 days have passed since your purchase, please contact us about the possibility for a refund, store credit or exchange.
Splitters, chassis brackets, diffusers and side skirts are not returnable or exchangeable.
To be eligible for a return, your item must be unused and in the same condition that you received it. There are certain situations where only partial refunds are granted.
25% restocking fee applies to products returned without all original packaging. We will provide a return label in the first 30 days (since ship date) and deduct the cost of the return label from the refund.
After 31+ days customer must ship the item themselves. Shipping charges on the original order are not refundable unless it was a CJM shipping error. We do not provide return labels for international shipments.
For example: $75 part + $6 shipping fee = $81 order total. Customer would like to return because they no longer need it, or ordered the wrong part.
$75 (part cost) - $14 (return shipping label) = $61 refund.
Refunds (if applicable)
Splitters, chassis brackets, diffusers and side skirts are not refundable.
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a few days.
Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at Support@cjmind.com.
Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at support@cjmind.com, we will issue a return number and provide a return address.
Shipping
Please contact us before returning any merchandise. We will provide a return label in the first 30 days (since ship date). Depending on where you live, the time it may take for your exchanged product to reach you, may vary. We don’t guarantee that we will receive your returned item. We are not responsible packages lost by the carrier.
Install Info
Install Info
Install sheets can be found on CJMinstall.com. We are in the process of digitizing all sheets. If you can't find the copy you need, please email us! support@cjmind.com
Carbon Fiber & Fiberglass - Finish Levels
We have created this level system to set expectations when ordering a composite part from us. All parts are checked for adequate epoxy resin penetration through the layers. The level is describing the surface finish, not the quality of the composite. We use hand layup, vacuum infusion, and pre-preg (dry carbon) materials depending on the volume and size of the part. This list applies to all composite parts.
Similar to drywall in a house, we chose these levels because different use applications come with varying priorities.
For example: carbon parts on the bottom of the track car don't need to look as good as a mirror cap at eye level. The parts under your car will get peppered with road debris; so cost and function is often more important than cosmetics. C and D level parts have the least labor involved, and therefore provide the best value. All of our composite parts are made in Pennsylvania, USA. Yes, it is expensive - but every purchase helps keep skilled labor in the US.
- A level - Thick gelcoat or epoxy top coat to even out the entire finish. Part is sanded to a smooth finish. You can buff it yourself for a perfect finish. These parts will weigh more than a C level part from the added surface coatings.
- B level - All porosity is covered in a top coat, but may have some nibs and imperfect edges. These can be sanded down when you receive it, and more top coats applied if you want to improve the appearance of the part.
- C level - Part is cut to size, and clear coat is applied. Some areas may have porosity in the outer surface. We consider these parts the most affordable "finished" option, and best suited for a track car where they will see wear and tear, so appearance is not the primary goal, but function and weight savings is.
- D level - Raw part pulled off the mold that is cut to size with no top coat. We wash off the mold release. This is considered a DIY part that you can cut to size for your application and finish it yourself with a rattle can clear coat. Also applies to scratch and dent parts that have distorted weaves or other cosmetic defects.